Pages

Friday, October 19, 2012

How To Pass Elance Cisco Test Free Questions and Answers


Since most of the questions in Elance Cisco Test are the same as those in Odesk Cisco Test, I need not repeat myself because even the syllabus is the same. To prepare for this exam, click Odesk Cisco Test Link,  published earlier.

Free Elance Cisco Test Questions and Answers 


Question 1
What should be the value of configuration register in a router to boot IOS image stored in ROM?
a. 0x2102
b. 0x2101
c. 0x2142
d. ox101

Question 2
Which of the following routing protocols are distance vector routing protocols?
a. OSPF
b. RIP
c. EIGRP
d. IGRP

Question 3
You executed the following command on your router.
      Router(config)#router ospf 15
Which command will you execute next to complete OSPF configuration on your router?
a. Router(config-router)# network 172.16.0.0. 255.555.0.0. area 5
b. Router(config)# network 172.16.0.0 0.0.255.255 area 5
c. Router(config-router)# network 172.16.0.0. 0.0.255.255 area 5
d. Router(config# ip route ospf 172.16.0.0 255.255.0.0 area 5

Question 4    
If you have a subnet mask of /26 for class c network, how many subnets and host per subnet will you get?
a. 4 network  and 62 hosts
b. 16 networks and 16 hosts
c. 2 networks and 128 hosts
d. 62 networks and 2 hosts
e. 6 networks and 30 hosts


Question 5
Which of the following devices can be connected using a Rollover cable?
a. Router Ethernet Port to Router Ethernet Port
b. Switch Console Port to PC COM Port
c. Switch Ethernet Port to Switch Port
d. Router Ethernet Port to Switch Ethernet Port
e. Router Console Port to PC COM Port


Question 6
Which one of the following addresses can be used as a host address for the subnet 192.168.50.16/28
a. 192.168.50.32
b. 192.168.50.16
c. 192.168.40.64
d. 192.168.50.30
 
Question 7
Which is the command to configure q933a as frame relay LMI type?
a. Router(config)# frame-relay lmi-type q933a
b. Router#lmi-type q933a
c.. Router(config-if)#frame-relay lmi-type q933a
d. Router(config-if)#lmi-type q933a

Question 8
If UDP receive datagrams that are not in sequence, what will it do?
a. It will drop datagrams that are not in sequence
b. It will arrange then in sequence using sequence numbers
c. It will request source host to resend them
d. None of the above

Question 9
Which of the following is a valid unicast IP address?
a. 127.0.0.1
b. 224.5.7.1
c. 255.255.255.255
d. 172.16.5.15/30
e. 200.100.10.5/30

Question 10
What is the maximum number of valid IP addresses in a class B network?
a. 165536
b. 65534
c. 256
d. 254

Question 11
Which of the following provides routing protocol support for IPX. Appletalk and IP
networks simultaneously?
a. RIPv2
b. OSPF
c. IGRP
d. EIGRP

Question 12
On which layer of the OSI model do TCP & UDP work?
a. Transport layer
b. Session layer
c. Presentation Layer
d. Network Layer

Question 13
What is the command to show Frame relay map table?
a.Router(config)# show frame-relay map
b. Router#show frame-relay
c. Router(config-router)#show frame-relay table
d. Router#show frame-relay map

Question 14
Which of the following commands show Cisco IOS image file name?
a. Show startup
b. Show running
c. Show version
d. Show history

Question 15
Which protocol is used to find the MAC address of a device whose IP address is known?
a. ARP
b. SMTP
c. IARP
d. RARP

Question 16
Which command will you execute to use 16 subnets of a class C network with subnet mask of 255.255.255.240?
a.Router(config)#ip all-subnets
b.Router(config)#ip subnet 16
c.Router(config)#ip classless
d.Router(config)#ip subnet-zero

Question 17
Which of the following command is used to set console password?
a.Router(config)# enable secret abc
b.Router(config)# enable password abc
c.Router(config)# console password abc
d. Router(config-line)#password abc

Question 18
Which of the following VLANs is recommended by Cisco to be used as an administrative VLAN?
a. VLAN 0
b. VLAN 1
c. VLAN 1024
d. VLAN 16

Question 19
What is the correct order of data encapsulation in OSI model?
a.Packet, segment, frame, data, bit
b. Segment, packet, frame, bit, data
c. Bit, frame, segment, packet, data
d. Data, segment, packet, frame, bit

Question 20
Which of the following statements are true for inter VLAN communication?
a. A router that supports inter VLAN communication is required
b. The router must support the same encapsulation method as supported by the switch
c. If the router has only one Ethernet interface, sub-interfaces must be configured
d. All of the above


Question 21
Which statement is true about RID(Router ID) in OSPF?
a. It is always the highest IP address of active interfaces
b. It is the highest IP address of all configured loopback interfaces
c. It is locally significant
d. It is only used for election of DR

Question 22
Which command will you execute to see whether the cable attached with your router’s Serial 0 is DCE or DTE?
a. Show controllers serial 0
b. Show interface serial 0
c. Show IP interface serial 0
d.Show interface brief serial 0

Question 23
Which of the following switching methods forward the frame after reading the destination MAC address only?
a.Fast forward
b.Cut-through
c. Fragment free
d. Store and forward

Question 24
Which of the following frame-tagging methods can be used for creating a trunk link between Cisco and Non Cisco switches?
a. ISL
b. VTP
c. IEEE802.1Q
d. IEFT

Question 25
Which of the following  are store in RAM?
a.Starup-config
b. Running-config
c. Routing table
d. All of the above

Question 26
Which two statement are true about CHAP authentication method?
a. It is more secure than PAP
b. It is supported by HDLC
c. It is less secure than PAP
d. It sends authentication messages periodically during the connection

Question 27
Which command will you use to view sending and receiving of RIP update packets that normally run at the background?
a. Router(config-router)#debug ip rip
b. Router# debug rip packets
c. Router#debug ip rip
d. Router(config)# show rip packets

Question 28
Which is the c ommand to delete the configuration stored in NVRAM?
a. Delete nvram
b. Erase startup
c. Delete startup
d. Erase nvram

Question 29
What is the speed of a T1 line?
a. 128 kbps
b. 144 kbps
c. 2.048 Mbps
d. 1.544 Mbps

Question 30
If you set bandwidth of 64 kbps on an interface, what will be it’s cost in OSPF?
a. 256
b. 1562
c. 1024
d. 2096

Question 31
Which of the following must be configured on a switch to segment Broadcast Domain?
a. VTP
b. PVC
c. VLAN
d. FTP
e. TFTP

Question 32
In which of the following modes does a switch not participate in VTP domain, but still forward VTP advertisement by trunk links?
a. Server
b. Domain
c. Client
d. Transparent

Question 33
Which command will disable CDP on a router?
a. No cdp run
b. Disable cdp
c. No cdp enable
d. No cdp router

Question 34
Which command is used to disable domain lookup?
a. No ip domain-lookup
b. Disable domain-lookup
c. No domain-lookup
d. None of the above

Question 35
How many access control list can be applied on an interface?
a. One access control list in each direction for each protocol
b. Two access control lists in each direction
c. Unlimited
d. Access control list connate be applied on an interface

Question 36
What is the network ID of IP address 172.16.40.0/20?
a. 172.16.16.0
b. 172.16.36.0
c.172.16.32.0
d.172.16.0.0

Question 37
Different routing protocols use different methods to calculate the distance to a network. What is that method called?
a. Administrative Distance
b.Metric
c.Routing Table
d.None of the above

Question 38
What is the binary value of 157?
a. 11000111
b.10111001
c. 11100011
d. 10011101

Question 39
Which of the following services can be used to set up a database of MAC addresses that can be used for dynamic addressing of VLANs?
a. Static VLAN
b. VMPS
c. STP
d. VTP

Question 40
What is the main purpose of creating VLANs?
a. They create single collision domain
b. They provide fast speed to the LANs
c. They break up the broadcast domain
d. None of the above

Tuesday, October 16, 2012

How to Pass Odesk Cisco Test - Free Questions and Answers

 Odesk Cisco Test Syllabus
  • Network Security
  • WAN Technologies
  • LAN Switching & VLANs
  • Routing
  • Operating Cisco Devices
  • Networking Fundamentals
  • TCP/IP, Subnetting & VLSM

How to Pass Odesk Cisco Test - Free Questions and Answers


Question 1
State whether True of False
You have two routers connected with point-to-point links using different encapsulation methods. They will be able to communicate with each other.
a. True
b. False

Question 3
What is the full form of ISDN?
a. International Subscriber Digital Network
b. International Services Digital Network
c. Internet Services Digital Network
d. Integrated Services Digital Network

Question 4
Which of the following things are stored in RAM?
a. ARP cache
b. Running configuration
c. Routing tables
d. All of the above

Question 5
Which protocol uses port number 23?
a. FTP
b. SMTP
c. Telnet
d. HTTP

Question 6
Which of the following commands will you use to enable RIP version 2 on your router?
a. Router(config)#version 2
b. Router(config-router)#version 2
c. Router(config-if)# version 2
d. Router#rip version 2

Question 7
Which command is used to encrypt all the passwords of a router?
a. enable password-encryption
b. service password-encryption
c. encrypt passwords
d. enable encrypt-password

Question 8
In which of the following memories is Mini-OS or bootloader of a router stored?
a. RAM
b. ROM
c. NVRAM
d. Flash Memory

Question 9
Which type of NAT uses different ports to map multiple IP addresses to a single global IP address?
a. Dynamic NAT
b. NAT with overloading
c. Static NAT
d. All of the above

Question 10
Which information is exchanged by Cisco devices on which CDP is running?
a. Routing Tables
b. Platform
c. Traffic Data
d. Capabilities List
e. Username & Password

Question 11
What is the speed of ISDN PRI service with 30B + 1D channel?
a. 2.048 Mpbs
b. 1.544 Mbps
c. 144 Kbps
d. 128 Kbps

Question 12
What is the OUI portion of MAC address B4-3F-95-5F-1D-09 in binary?
a. 10110100-00111111-10010101
b. 11100110-11001001-01110011
c. 11000011-10000111-11110001
d. 00111100-100100001-10111001

Question 13
 Which of the following are frame relay LMI types?
a. DLCI
b. Cisco
c. IEEE 801.1Q
d. Q933A

Question 14
Which is the default mode of operation in a VTP domain for all catalyst switches?
a. Client
b. Server
c. Transparent
d. None of the above

Question 15

 This Question is based upon the figure shown below


CISCO Class C Networks Subnet Masks
CISCO Class C Networks Subnet Masks



which subnet mask will you use to fulfill the requirement of all the departments if you are using a class C network?
a. 255.255.255.0
b. 255.255.255.252
c. 255.255.255.224
d. 255.255.255.192
e. 255.255.255.128

Question 16
Which command/s will you use to configure static routing on a router?
a. Router(config)# ip route static
b. Router(config)# ip route 0.0.0.0.0.0.0.0 172.16.0.1
c. Router(config)# ip route 10.0.0.0 255.0.0.0 172.16.0.1
d. Router(config)# ip route 192.168.1.0 255.255.255.0 E1
e. Router(config)# ip route 255.255.255.255 0.0.0.0 127.0.0.1

Question 17

Which of the following is a Multicast Address?
a. 127.0.0.1
b. 192.168.1.255
c. 10.0.0.0
d. 224.10.1.7

Question 18
Which of the following routing protocol are Cisco proprietary?"
a. IGRP
b. EIGRP
c. OSPF
d. RIP

Question 19
Which of the following cables is not prone to electrical interference?
a. Shielded Twisted Pair (STP)
b. Unshielded Twisted Pair (UTP)
c. Fibre Optic
d. Copper wire
e. Coaxial

Question 20
In which of the following network, are DR and BDR elected in OSPF?
a. Broadcast multi-access
b. Point-to-point
c. Nonbroadcast multi-access
d. Point-to-multipoint

Question 21
Which command is used to configure the configuration-register of a router?
a. Router(config)# config-register 0x2102
b. Router# config-register 0x2102
c. Router(config-line)# config-register 0x2102
d. Router(config-router) config-register 0x2102

Question 22
Which of the following Protocols work on Application Layer of OSI model?
a. HTTP
b. FTP
c. IP
d. UDP

Question 23
 What is the  default number of commands that a router can show if you execute 'show history' command?
a. 15
b. 10
c. 20
d. 256

Question 24
Which of the following devices is used to connect a non ISDN device with an ISDN network?
a. NT1
b. TE2
c. TA
d. TE1

Question 25
How many bearer(B) and data(D) channel/s are there in a standard ISDN BRI service?
a. 2B +1D Channel
b. 23B + 1D Channel
c. 24B + 2D Channels
d. 16B + 1D Channel

Question 26
Which key combination is used to interrupt the boot sequence of a route?
a. Esc + Ctrl
b. Ctrl + Z
c. Ctrl + Break
d. Alt + Ctrl + Del

Question 27
What is the hop count limit for OSPF?
a. 15
b. 255
c. 256
d. None

Question 28
State whether True or False
You can only create that number of VLANs which are equivalent to the number of ports on a switch
a. True
b. False

Question 29
What is the maximum speed supported y a standard ISDN BRI?
1. 64 kbps
b.128 kbps
c. 256 kbps
d. 1.544 mbps

Question 30
The question is based upon the figure shown below


CISCO Troubleshooting WAN Problems
CISCO Troubleshooting WAN Problems


Refer to the diagram
Host A is not able to communicate with Host B. Router A can communicate with Host B. What could be the problem?
a. Host A's IP address is incorrect
b. Router A's Ethernet 0 IP address in incorrect
c. Host B's address is incorrect
d. No routing is configured among the routers

Question 31
 What is the maximum number of subnets (usable) that you can create in a class B network?
a. 16384
b. 32768
c. 65536
d. infinite

Question 32
How many bits of a MAC address are used by OUI portion?
a. 32 bits
b. 48 bits
c. 24 bits
d. 16 bits

Question 33
Which two authentication methods can be used with PPP links?
a. CHAP
b. Verisign
c. PAP
d. MD5

Question 34

This question is based upon the figure shown below



CISCO Router Serial Links Subnet Masks
CISCO Router Serial Links Subnet Masks

Which of the following subnet masks should you use on Router A and Router B serial links so that there is minimum wastage of IP addresses?
a. 255.255.255.255
b. 255.255.0.0
c. 255.255.255.0
d. 255.255.255.252
e. 255.255.255.254

Question 35
Which of the following addresses is reserved for loopback tests?
a. 10.0.0.1
b. 172.16.0.1
c. 192.168.0.1
d. 127.0.0.1

Question 36
 Which of the following switches support both ISL and 802.1Q encapsulation methods?
a. 1900
b. 2950
c. 3550
d. All of the above

Question 37
Which command will you use to configure IP address on an interface?
a. Router(config-if)# ip 192.168.1.1 255.255.255.0
b. Router(config-if)# ip address 192.168.1.1
c. Router(config-if)# ip address 192.168.1.1./24
d. Router(config-if)# ip address 192.168.1.1. 255.255.255.0
e. Router(config-if)# ip address 192.168.1.1. subnet 255.255.255.0

Question 38
What is the maximum number of hosts allowed on subnet 172.16.50.75/22?
a. 510
b. 1022
c. 4094
d. 8190

Question 39
Routing protocols use a method to advertise many networks as one network to others routers. What is that method called?
a. Supernetting
b. Summarization
c. Subnetting
d. None of the above

Question 40
 What is the binary value of hex BF?
a. 10100000
b. 10111111
c. 11111000
d. 00111011


Section B



Question 1
You made some changes in your router’s configuration and executed the following command.
          Router#copy run start
When you restarted your router it went into the Setup mode. What is the problem?
a. The command ‘copy run start’ is incorrect
b.The NVRAM is corrupt
c. The value of configuration register is set to 0x2142
d. Nothing is wrong; you have to configure the router every time it restarts

Question 2
Which of the following routing protocols are not classless routing protocols?
a. EIGRP
b. OSPF
c. IGRP
d. RIP v1

Question 3
Which of the following routing protocols support VLSM?
a. RIP v1
b. RIP v2
c.IGRP
d. EIGRP
e. OSPF

Question 4
Which command is used to view IP routing table?
a. Show ip table
b.Show route
c.Show ip route
d. Show routing table

Question 5
Which command is used to view the list of all active connections made to the console and VTY ports of your router?
a. Show sessions
b. Show connections
c. Show lines
d. Show users

Question 6
Which of the following devices can be connected using a straight cable?
a. Hub & switch
b. Router & PC
c. PC & PC
d. Router & switch


Question 7
What is the command to configure PPP encapsulation on serial 0?
a. Router(config)#configure encapsulation ppp
b. Router(config)#encapsulation ppp
c. Router(config-if)encapsulation ppp
d. Router# encapsulation ppp serial 0

Question 9
If interface Ethernet 0 is showing that it is administratively down, what will you do to turn it on?
a. Change the cable connected with Ethernet 0
b. Restart the router
c. Execute ‘no shutdown’ command
d. Execute ‘clock rate’ command


Question 10
What is the default value of bridge priority on Cisco switches?
a. 65536
b. 16384
c. 32768
d. 256

Question 11


What is the default value of flush timer in IGRP?
a. 630 seconds
b.90 seconds
c. 270 seconds
d. None of the above

Question 12 


If a router has been configured for static routing, IGRP, OSPF, EIGRP and RIP with their default values, which routing will the router use to send data?
a. RIP
b. OSPF
c. IGRP
d. EIGRP
e Static Routing



Question 13
How many Broadcast Domains are there if two switches are connected to each other using a trunk link?
a .2
b. 1
c. 4
d. None

Question 14


Which of the following are examples of the Data Link Layer?
a. Token ring
b. IP
c. Ethernet
d MAC
e IPX

Question 15

 


What do you understand from the following commands?
Access-list 110 deny tcp 192.168.10.0 0.0.0. 255 any eq 21
Access-list 110 permit ip any any
a. This access-list denies any Telnet traffic from network 192.168.10.0 255.255.255.0
b. This access-list allows any IP traffic from any source t any destination
c. This access-list denies any FTP traffic from network 192.168.10.0 255.255.255.0
d. This access-list denies any FTP traffic to network  192.168.10.0 255.255.255.0